Home / Pools & hot tubs / Above-ground pool

Pools & hot tubs

How do I winterize an above-ground pool?

Direct answer

Start with your pool's owner's manual, because the right answer depends on the type of pool. Some soft-sided pools are meant to come down for winter: Intex's Easy Set manual says to drain, take down, and store the pool once temperatures drop below 41°F (5°C), and Bestway strongly recommends taking down its Steel Pro and Power Steel frame pools for the off-season. Other pools can be closed with water in them: Intex's 2024 Metal Frame manual and Doughboy's winter cover guide describe cleaning and balancing the water, adding winter chemicals your pool dealer recommends, plugging the return fittings, setting the water level, and covering the pool, with an air pillow in colder climates. Either way, turn off the power, drain the pump, filter, and hoses, and store them indoors. Check your local rules before you drain any pool water.

What you’ll need

  • Your pool, pump, and filter owner's manuals (look up your model on the manufacturer's support site if you lost the paper copy)
  • A water test kit and the winter chemicals your local pool dealer recommends for your area. Intex says the right products vary a great deal by region
  • Gloves and safety goggles for handling chemicals
  • The plugs that came with the pool for the inlet and outlet fittings, if your model uses them (some larger Intex pools have plunger valves instead)
  • A winter cover that fits your pool, and an air pillow if your climate calls for one
  • A small pump or siphon to remove standing water from a solid cover
  • A garden hose and your pool's drain connector, if you are draining the pool
  • A dry indoor spot for the pump, filter, hoses, ladder, and any liner you take down

This guide is independent. We are not affiliated with Intex, Bestway, Hayward, or Doughboy. We cite their published instructions because they are the people who know their equipment.

Steps: closing a pool that stays up

  1. Make sure your pool is allowed to stay up. Read the winter section of your owner's manual first. Intex's Easy Set manual (6–18 ft models) says to drain, take down, and store the pool once temperatures fall below 41°F (5°C), and warns that ice damage can cause sudden liner failure or pool collapse. Bestway's Steel Pro, Steel Pro MAX, and Power Steel manual strongly recommends taking the pool down for the winter months and says not to leave a drained pool outside. If your manual says to take the pool down, skip to the next set of steps. Intex's 2024 Metal Frame manual (8–24 ft) gives you the choice: take it down, or leave it up and winterize it. Doughboy's cover guide for hard-wall above-ground pools assumes the pool stays up with water in it.
  2. Clean the water and balance it. Intex says to filter and clean the water thoroughly, balance the chemicals, and leave the clean water in the pool. Doughboy suggests doing this, including testing and cleaning the water, a few days before you put the cover on.
  3. Take out the ladder and accessories. Remove the ladder, skimmer, sprayer, toys, and anything else in the pool. Intex says to make sure each piece is clean and completely dry before you store it.
  4. Turn off the power, then disconnect the pump and filter. Switch off and unplug the filter pump (Hayward: turn off power to the motor before draining the pump). Plug the inlet and outlet fittings from inside the pool with the plugs supplied, or close the plunger valves if your pool has them (Intex). Then take off the hoses that connect the pump and filter to the pool.
  5. Set the water level your manual calls for. Sources differ here. Doughboy says the water can stay at its normal level if you block the skimmer with a cover plate; otherwise lower it to slightly below the skimmer. Hayward's PowerFlo Matrix pump manual says to lower the water below all inlets to the pool when you drain the pump for freezing weather. Intex's frame-pool steps say to leave the clean water in the pool and plug the fittings. Use the number from your pool's own manual. Don't drain a pool that is meant to stay up unless the manual says you can, and check local rules for any water you do remove.
  6. Add winter chemicals only as the label directs. Intex says to ask your local pool dealer which winter chemicals to use and how to use them. Follow the label exactly, wear your gloves and goggles, add chemicals to the pool water (never water to the chemical), and never combine products (see the safety box above).
  7. Drain and store the pump, filter, and hoses. Intex says to store this equipment properly once temperatures drop below 32°F (0°C) to prevent ice damage. For an Intex cartridge filter pump, clean and drain the pump, filter housing, and hoses, throw away the old cartridge, and store everything indoors in a dry place, ideally between 32°F and 104°F (0–40°C). Hayward's PowerFlo Matrix (a pump for permanently installed pools) steps are: power off, remove the drain plug at the bottom of the strainer body, take the pump off its base, let it drain, put the strainer lid and plug back, and store it in a dry place. Hayward also says not to wrap the pump in plastic film or bags, which can cause condensation and corrosion. For a Hayward ProSeries sand filter, Hayward says to drain the tank by removing the drain cap at the base (leave the cap off for the winter) and set the valve handle between two positions so water can drain from the valve. Other brands vary, so follow your pump and filter manuals.
  8. Put on the winter cover. Use the cover made for your pool. Intex mentions its own cover or a winter cover from your pool dealer, and recommends an air pillow in the center depending on how severe your winter is. Doughboy says to blow up the pillow one-half to three-quarters full and tie it so it stays in the middle, to pad any sharp edges that could tear the cover, and to tighten the cable so wind can't get under the cover.
  9. Check on the pool through the winter. Doughboy says to check the cable tension and to remove water that collects on a solid cover. Mesh covers let water drain through. Leave ice alone until it melts. PHTA says to drain standing water off the cover, for example with a pump. Before you take a solid cover off in spring, siphon off the water sitting on it (Doughboy).

Steps: taking a soft-sided or frame pool down

  1. Check local drainage rules first. Both Intex and Bestway say to check local regulations. Plan where the water will go: away from the house and other buildings, and not into a storm drain if local rules prohibit it. The EPA lists draining to a sanitary sewer, or dechlorinating and then discharging or irrigating, as alternatives that communities may allow.
  2. Drain through the pool's drain valve. For Intex pools, make sure the drain plug inside the pool is in place, remove the cap from the outside drain valve, attach a garden hose to the drain connector, and then attach the connector to the valve. Water starts draining right away. When it stops, lift the side opposite the drain to push the rest of the water out, then put the plug and cap back. Bestway pools use a hose adapter with a control ring that opens the valve and lets you control the flow. Keep children away from the pool the whole time it is draining.
  3. Take it apart and rinse it. Reverse the setup steps in your manual. Bestway says to rinse chemicals and dirt off the liner.
  4. Dry everything completely. Intex says to air-dry the liner in the sun until it is completely dry before folding. Bestway warns that a liner stored damp can grow mold that damages it. Bestway's online take-down guide also says not to use a hair dryer or other heat and not to leave the liner out in the sun for several days.
  5. Dust, fold, and store. Both brands suggest a little talcum powder so the vinyl doesn't stick to itself. Store the liner and parts indoors in a dry place where they can't collect rain or blow away. The storage temperatures in the sources differ: Intex says 32–104°F (0–40°C), Bestway's Steel Pro and Power Steel manual says 41–100°F (5–38°C), and Bestway's 2025 online take-down article suggests 59–100°F. Use the range in your own manual.

Common mistakes and variations

Treating the winter cover as a safety cover

Most winter covers are not safety covers. PHTA's booklet says a cover used as a safety cover must meet ASTM F1346, and Intex says its cover is not a safety cover. A covered pool may still need a fence or other barrier, and children still need watching. Intex's manual notes that pool owners may need to follow local or state laws on fencing and barriers.

Leaving a puddle on a solid cover

Rain and snowmelt collect on solid covers. Remove the water regularly (Doughboy, PHTA). Even a small amount can be a drowning hazard for a small child.

Dumping pool water into the street

Chlorine, bromine, and salt don't belong in streams, and many towns regulate where pool water can go (EPA). Salt-water pools count too: EPA names salt along with chlorine and bromine as harmful to local water quality. Ask your city or wastewater utility before you drain.

Leaving the pump and hoses outside

The manuals we checked all say to drain the pump, filter, and hoses and store them indoors or in a dry enclosure. Intex suggests 32–104°F (0–40°C). Don't seal the pump in a plastic bag (Hayward).

Forgetting the winter plugs in spring

Hayward warns that leaving plugs used for winterizing in the suction outlets can increase the risk of suction entrapment. When you open the pool, take out every winter plug before you run the pump, and follow your manual's start-up steps.

Salt systems, heaters, and anything hardwired

This guide does not cover salt chlorinators, heaters, or hardwired equipment. Follow each product's manual. If a step calls for electrical work, or you find a leak, a damaged wall or frame, or a torn liner, call a pool professional or licensed electrician rather than guessing.

FAQ

Should I drain my above-ground pool completely for winter?

It depends on the pool, so follow your owner's manual. Intex's Easy Set manual (6–18 ft models) says to drain, take down, and store the pool once temperatures drop below 41°F (5°C), because ice damage can cause sudden liner failure or pool collapse. Bestway's Steel Pro, Steel Pro MAX, and Power Steel manual strongly recommends taking the pool down for the off-season. Intex's 2024 Metal Frame manual (8–24 ft) lets you choose between taking the pool down and leaving it up with clean water in it. Doughboy's winter cover guide for hard-wall above-ground pools assumes the pool stays up with water in it, at normal level or slightly below the skimmer.

How far should I lower the water if the pool stays up?

Sources differ, so use your pool manufacturer's number. Doughboy says the water can stay at normal level if you block the skimmer with a cover plate; otherwise lower it to slightly below the skimmer. Intex's Metal Frame manual says to leave the clean water in the pool and plug the inlet and outlet fittings or close the plunger valves. Hayward's PowerFlo Matrix pump manual says to lower the water below all inlets to the pool when you drain the pump for freezing weather.

Do I need an air pillow under the cover?

Intex recommends an air pillow in the center of the pool, depending on how severe your winter is; it says the pillow helps absorb the expansion of freezing water and relieves pressure on the cover from snow. Doughboy also recommends one, blown up one-half to three-quarters full and secured in the middle. Check your own pool and cover instructions.

Is a winter pool cover a safety cover?

Usually not. Intex states plainly that its pool cover is not a safety cover. The Pool & Hot Tub Alliance's above-ground pool safety booklet says ordinary pool covers do not prevent drowning or entry into the pool, that standing water on a cover should be drained because even a small amount may be enough for a small child to drown, and that a cover used as a safety cover must meet ASTM F1346. Keep children away from a covered pool.

Where can I drain my pool water?

Check local rules first; Intex and Bestway both tell owners to check local regulations before draining. The U.S. EPA says water treated with chlorine, bromine, or salt harms local water quality and is toxic to fish and wildlife when it reaches surface waters, and that many communities restrict discharges to storm drains. Options EPA lists include draining to a sanitary sewer, or dechlorinating first and then discharging or irrigating, where local rules allow. The National Pesticide Information Center suggests contacting your local wastewater provider, water authority, city, or state environmental agency for guidance.

Sources

We checked these manuals and pages while writing this guide. Where they disagree, we say so above. Follow your own pool's manual if it differs.

  1. Metal Frame Pool Owner's Manual, 8'–24' models (87IO, 2024) — IntexWinter preparations: take the pool down or winterize it in place; leave the clean water in; plug the fittings or close the plunger valves; air pillow; the cover is not a safety cover; liner stiffens below 32°F; store the pump and accessories at 32–104°F; draining steps and checking local regulations; GFCI warning.
  2. Easy Set Pool Owner's Manual, 6'–18' models (86IO, 2023) — IntexDrain, take down, and store when temperatures drop below 41°F (5°C); ice damage can cause liner failure or collapse; draining steps; GFCI warning.
  3. Power Steel, Steel Pro MAX & Steel Pro Owner's Manual (303021190784) — BestwayStrongly recommends taking the pool down for the off-season; check local regulations before draining; don't leave a drained pool outside; store at 41–100°F; GFCI and dry-ground warnings; drowning hazard while filling and draining.
  4. How to Take Down Your Bestway Above Ground Pool — Bestway (updated September 17, 2025)Manufacturer take-down steps: rinse, sun-dry without heat, optional talcum powder, loose folds, store at 59–100°F.
  5. Winter Pool Cover Installation Guide — Doughboy PoolsAbove-ground closing prep, water level with or without a skimmer cover plate, air pillow one-half to three-quarters full, pad sharp edges, cable tension, remove water from solid covers, leave ice alone.
  6. PowerFlo Matrix Pump Owner's Manual (ISSP1591 Rev H) — HaywardStorage and winterization: turn off power, lower the water below the inlets, remove the strainer drain plug, store dry, don't wrap in plastic; warning about winterizing plugs left in suction outlets.
  7. ProSeries High Rate Sand Filter Owner's Manual (IS210T Rev J) — HaywardWinterizing: drain the tank through the base drain cap and leave it off; set the valve between positions so it drains.
  8. Pool and Spa Chemicals Fact Sheet — National Pesticide Information Center (Oregon State University and U.S. EPA cooperative agreement)Protective equipment, never mixing products, adding chemicals to water, storage away from children and pets, Poison Control number, and asking local agencies before discharging pool water.
  9. Chemical Safety Alert: Safe Storage and Handling of Swimming Pool Chemicals (EPA 550-F-01-003, March 2001) — U.S. EPAPool chemicals can become hazardous when wetted or improperly mixed; fire and toxic-vapor incidents.
  10. Stormwater Best Management Practice: Educating Residents on Safely Discharging Chemically Treated Water (EPA-832-F-21-032G, February 2023) — U.S. EPAChlorine, bromine, and salt water harm local water quality; alternatives such as sanitary sewer or dechlorinating; many local ordinances restrict discharges.
  11. The Sensible Way to Enjoy Your Aboveground/Onground Swimming Pool (2019) — Pool & Hot Tub AllianceOrdinary covers are not safety covers; drain standing water from covers because even a small amount can drown a small child; safety covers must meet ASTM F1346.

Related guides